Jerryborg Marine,safe docking,safe mooring

Ultrahigh Molecular Weight Polyethylene Small Mark Buoy

Group Small Marker Buoy
PriceUS $600 / set
Min. Order 1 set
Terms of Payment L/C, Western Union, T/T, Paypal
Update Time 2019-10-30
Item specifics
ColorRed, Green, Yellow, White
MaterialUltrahigh Molecular Weight Polyethylene
Diameter600mm
ServiceCustomized service is available
 Ultrahigh Molecular Weight Polyethylene Small Mark Buoy

      

                                                                                                                                                   

What is JRB-SMMB ?


JRBSMMB is a short-range buoy ready for immediate installation. Typical applications include day and night channel, speed zone and restricted area marking.

The stainless steel mooring bush is moulded directly into the buoy during manufacture for superior durability and strength. A large mooring chain attachment point accommodates a 16mm shackle or 12mm silver rope.

The complete assembly is only 18.5kg (41lbs) and is available in standard high visibility Yellow, Green, Red and White. Custom mould-in graphics are also available on request.

What is the advantage of JRB-SMMB ?
  • Recommendationsrange of mooring equipment & chain available.

  • Excellentbuoyancy & stability.

  • 16mmshackle or 12mm silver rope attachment point.

  • Mould-in graphics to suit customer requirements.
JRB-SMMB Application
  • Main Channel
  • Recommended Channel
For further information feel free to contact us .


>> Dimensions of JRBSMMB
Technical Specification
General Characteristics
Available Colours Red, Green, White, Yellow as per IALA Recommendations
Focal Plane Height 960 / 373/4
Total float Volume (ltrs/US gallon) 90 / 24
Nominal Freeboard (mm/inches) 160 / 61/3
Nominal Draft (mm/inches) 250 / 97/8
Total Researve Buoyancy  (kgs/lbs) 74 / 163
Operational Buoyancy (kgs/lbs) 26 / 57
Maximum Mooring Load (kgs/lbs) 26 / 57
Draft,Maximum (mm/inches) 335 / 131/8
Freeboard, Minimum (mm/inches) 70 / 23/4
Submergence (kg/cm, lb/inches) 2.8 / 15.8
Phisical Characteristics
Material Rotationally-moulded UV-stabilised virgin polyethylene
Wall Thickness (mm/inches) 7 / 1/4
Ballast (kg/lbs) 6 / 13 internal concrete
Filling Closed-cell polyurethane foam
Height (mm/inches) 1150 / 451/3
Width (mm/inches) 600 / 235/8
Mass (mm/inches) 18.5 / 41
Product Life Expectancy Up to 12 years
Certifications
IALA Surface colours compliant to IALA E-108
Quality Assurance ISO9001:2015
Intellectual Property
Trademarks Jerryborg® is a registered trademark.
Warranty* 1 year
Options Available •   Custom  signage
 

•   Integrated light mount top section 

•   Customized service is available